|
Part 1: The Land of BL2000
by Fred Eady
Start ı Z-Worldıs
BL2000 ı C Meı ı Lock
and Load ı Acquire the Voltage Data
ı Transport and Display the Voltage Data
ı Just the Beginning ı Sources
and PDF
JUST THE BEGINNING
Iıve just shown you only a couple of
the features of the Z-World BL2000. I also tested a feature that I
hope youıll never have to use. Late one night while writing this article,
I accidentally put a couple of amps through the DAC circuitry. That
little mistake also crippled the ADC reference voltage. Fortunately,
I was able to remove and replace the tiny but now smokeless DAC ICs
myself. If I can do that, you or your technicians can too. Thatıs
a big plus when downtime is a concern.
I whacked the entire ADC and DAC area
and had to do a "midnight" manual re-calibration. I was
sort of careful and still achieved a 1% accuracy in my readings. The
BL2000 comes calibrated from the factory, and the actual readings
before I blew the smoke out would surely have been more accurate as
they probably calibrated the outgoing units while wide awake.
If I werenıt out of virtual paper, I
could extend this voltage reading transmission idea to include reading
and writing the Z-World BL2000ıs digital I/O ports over the Internet.
Or, I could do some RS-485-to-Internet data transfers. If you donıt
need to gather data or control devices remotely using TCP/IP and Ethernet,
then serve some web pages or send e-mails with the facilities found
on the Z-World BL2000 and within Dynamic C Premier.
Hopefully, Iıve shown you a way to solve
a problem or sparked an idea for you to expand. In either case, thereıs
more of this technology to talk about. So, keep your eyes on Circuit
Cellar Online until next time when weıll take yet another
adventurous journey down the river Internet.
PREVIOUS
NEXT
Circuit Cellar provides up-to-date information for engineers. Visit
www.circuitcellar.com for
more information and additional articles.
For subscription information, call (860) 875-2199, subscribe@circuitcellar.com
or subscribe online.
ıCircuit Cellar, the Magazine for Computer Applications. Posted with
permission. |