ChipCenter Questlink
SEARCH CHIPCENTER
Search Type:
Search for:




Knowledge Centers
Product Reviews
Data Sheets
Guides & Experts
News
International
Ask Us
Circuit Cellar Online
App Notes
NetSeminars
Careers
Resources
FAQ
EE Times Network
Electronics Group Sites

Questions


Circuit Cellar Online
THE MAGAZINE FOR COMPUTER APPLICATIONS
Circuit Cellar Online offers articles illustrating creative solutions
and unique applications through complete projects, practical
tutorials, and useful design techniques.

WHAT'S YOUR ENGINEERING QUOTIENT?

Test Your EQ

Problem 1In power wiring, what is the difference between the "grounded conductor" and the "grounding conductor"?

ANSWER Go


Problem 2—What is an eye diagram?

ANSWER Go


Problem 3—The Windows .WAV file format for audio is a special case of what more general file format?

ANSWER Go


Problem 4—What is a software API?

ANSWER Go


Problem 5—A circuit board, intended to plug into a backplane with only its short end exposed (see diagram) was found to have excessive radiated energy at harmonics of a clock frequency used on the board. It was found that the clock oscillator's output signal ran parallel to several other traces that drove status LEDs for a disance of several inches. Harmonics of the clock waveform were coupling to these LED traces, where they were carried to the front of the chassis and radiated. Name some techniques that could be used to mitigate this problem.

ANSWER Go


Problem 6—You need to put together a memory array of 1M words of 32 bits each. You have a choice of two different 4 Mb parts: 1M x 4 or 256K x 16. What are some of the issues that would cause you to choose one over the other?

ANSWER Go


Problem 7—What will be the output of the following C code fragment?

 
int x, y;
y = 5;
x = (y += 2, 21/y++);
printf ("%d,%d", x, y);
a) Compile error
b) 3,8
c) 7,7
d) 7,8

ANSWER Go


Problem 8—Design a +5V regulator based on an LM317 three-terminal regulator chip. The output voltage should vary less than 1% over temperature, and a trimpot should be included that provides a ±20% adjustment range. Use standard component values to come as close as possible to these specifications.

ANSWER Go

 

11-01

Click here to get your listing up.

Copyright © 2003 ChipCenter-QuestLink
About ChipCenter-Questlink  Contact Us  Privacy Statement   Advertising Information  FAQ